Reputable design and build contractor for cleanroom compressed air systems.

Compressed air systems are increasingly being used in industry, especially in units that manufacture pharmaceuticals, dietary supplements, etc. So which unit is a reputable unit for designing and constructing cleanroom compressed air systems? Let's find out in detail through the following article.

What is a cleanroom compressed air system?

A compressed air system is a collection of compressed air equipment connected together to provide clean compressed air for production needs. It is especially widely used in areas that need to ensure hygiene, cleanroom production, or hazardous environments.

Specifically, such as the production of pharmaceuticals, dietary supplements, cosmetic cleanrooms, electronic component manufacturing, and product packaging on automated production lines.

A compressed air system usually includes key equipment such as:

• Air compressor
• Compressed air storage tank
• Air dryer
• Industrial air filter

In today's industrial plants, compressed air makes the operation process easier and more convenient. In addition, the cleanroom compressed air system also ensures energy uniformity between operating parts, so maintenance, repair, or cleaning is also very easy.

Designs for cleanroom compressed air systems for pharmaceuticals, cosmetics, and dietary supplements

Cleanroom compressed air system designed by AKME

>>> See more: Fire protection system in cleanrooms

Each factory will have its own requirements for the design and construction of a suitable compressed air system. In this content, we will learn about the designs of compressed air systems: Refrigerant compressed air systems and Absorption compressed air systems.

Refrigerant compressed air system

Installation sequence:

Air compressor => Air storage tank => Air dryer => Filter

Place the compressed air tank near the air compressor. If there is enough investment cost, two air tanks should be used. A wet air tank is installed after the air compressor. And a dry air tank is installed after the air dryer to ensure that the pressure does not drop.

To ensure compressed air pressure loss, the air dryer will be installed after the compressed air tank.

Install a filter after the air dryer to ensure that the filter is not clogged by moisture and water in the compressed air.

Absorption compressed air system

Installation sequence:

Air compressor => Air storage tank => Coarse filter => Absorption air dryer => Fine filter

Should be used in conjunction with an oil-free air compressor.

Choose to use a compressed air tank that is suitable for the capacity of the air compressor.

Install the air storage tank before the absorption air dryer.

Install a coarse filter before the air dryer. This is to prevent the absorption air dryer from malfunctioning due to water and moisture.

Dust filter from the absorption air dryer after drying, the fine filter should be installed after this air dryer.

Notes when designing and constructing cleanroom compressed air systems

Designing a cleanroom compressed air system is the ideation, calculation, selection, and arrangement of equipment in the compressed air system, including: Screw air compressor, compressed air dryer, compressed air storage tank, industrial air filter.

Some notes when designing a cleanroom compressed air system are as follows:

Determine the output compressed air requirements

For the pharmaceutical, cosmetic, dietary supplement, medical, and food processing industries, ... the output compressed air needs to be dry, pure, free of oil vapor, and nearly absolutely clean. The factory needs an oil-free screw air compressor and a good quality air dryer.

Calculate the compressed air flow rate needed in the factory

It is necessary to carefully calculate all the flow rates needed and add a contingency to avoid compressed air leakage or additional needs arising during use.

Select the equipment in the factory's compressed air system

Any compressed air system needs basic equipment, which is a screw compressor. Then there are the devices in the compressed air system such as: compressed air dryer, compressed air tank, industrial air filter.

Reputable unit for designing and constructing cleanroom compressed air systems

Anh Khang Cleanroom Mechanical Electrical Joint Stock Company is a unit specializing in designing and constructing cleanrooms in general and cleanroom compressed air systems in particular. Through many years of operation, we have a team of experienced staff, with high professional qualifications, strong capabilities, and many years of experience accumulated through completed projects.

The projects implemented by Anh Khang all have high requirements for quality and technique, but always ensure customer satisfaction.

Hopefully, with the sharing of Anh Khang, it will help you better understand the content of cleanroom design and construction and the design and construction of cleanroom compressed air systems for pharmaceutical - cosmetic, and dietary supplement factories.

For detailed information on CLEANROOM CONSULTATION - DESIGN - CONSTRUCTION, please contact:

Anh Khang Cleanroom Mechanical Electrical Joint Stock Company Hotline: 1900 636 814 Email: info@akme.com.vn Website: akme.com.vn Add: Lot B7 Xuan Phuong Garden, Trinh Van Bo Street, Phuong Canh Ward, Nam Tu Liem District, Hanoi.